PINE PACIFIC CORPORATION LIMITED

 
Click here to signup!
Forgot your password?
maintenance
 
PINE PACIFIC | LOGIN
   
 
   
 
 
 
  FERROUS   Green Sand System Additive   Coal Dust (Sea Coal)  
 
Coal Dust (Sea Coal)
  DESCRIPTION

Coal Dust the carbonaceous carbon add in green systems for the production of Grey Iron and Ductile Iron castings use Coal in one form or another as the carbonaceous additive in the system.
This carbonaceous additive facilitates a reducing atmosphere through its volatile content, and the lustrous carbon liberated in turn ensures the metal does not wet the surface of the sand grains, and subsequently is responsible for a quality surface finish, free from sand defects and associated metal penetration.  


Raw Coal prior to processing (typically 5 to 10 cm lumps) Many replacement materials to Coal have been tried with varying degrees of success over the years, but they have all come up against the one fundamental problem: Coal during its heating phase, produces not only a lustrous carbon product, which is critical to its surface finish and protection of the casting face, but also a Coke residue, which again is critical as the sand is recycled and stops metal penetration by filling the voids between the sand grains. For a substitute to achieve this degree of Coking, along with the other attributes required, has not been successfully achieved using materials such as pitch, polystyrene, oil based products, resin based products, and combinations.  


Now we are an agency of “Coal Dust” from Durrans in UK, Coal Dust of Durrans in famous in UK Foundry Industry more than 10 years ago because it has provided excellent result to a wide range of foundries and it also has an concession in many foundries in Germany and many other countries in which Durrrans have marketed this product.


We “Pine Pacific Corporation Limited “ have the quality control process of Coal Dust by we have an our laboratory for checked quality of coal dust every lot that come to our stock to confirm a quality as identify specification from supplier and also have laboratory in oversea (Durrans laboratory) in case of the customers need to confirm from the supplier.
Coal Dust of Durrans made from high quality of raw materials then it has lower Ash, moisture content and high fixed carbon and optimum volatile matter (rather high) that good for casting surface finished.

 

ORIGIN: England

 

ADVANTAGE OR BENEFITS:
• Low Ash content because if coal dust has high ash content it cause to casting defects such as gas defect due to it will increase moisture demand beside if coal dust has high ash will increase addition then the good coal dust should be has low ash content.
• High Volatile that means coal dust, which has high volatile, can improve casting surface better because it will increase lustrous carbon generate.
•  High lustrous carbon, the lustrous carbon is main factor to improve the casting surface finished because it help to protect sand stick at casting surface and oxidize reaction then the casting has good surface.
• High fixed carbon, in green sand has a lot of moisture then it easy to happen sand burn (FeSiO4) by oxidizing at casting surface so we put coal dust into green sand to provide carbon for reducing agent to protect sand burn.
• High swell index it helps to reduced expansion defect.
• Low sulphur content.
• Low chlorine content.

 

   
  STANDARD SPECIFICATION
PRODUCT ASH VOLATILE MOISTURE LUSTROUS Swell FC S N    Typical Particle Distribution (% Retained)  
1.00 mm 0.50 mm 0.21 mm 0.15 mm 0.075 mm  
16 # 30 # 72 # 100 # 200 # Pan
BSS BSS BSS BSS BSS  
Graded Coal High Volatile 
30 3 40 6.00 8 2 58 0.60 0.80 0 23 47 12 13 5
75 3 40 5.50 8 2 58 0.60 0.80 0 13 37 15 22 13
100 3 40 5.00 8 2 58 0.60 0.80 0 10 28 12 22 28
145 3 40 5.00 8 2 58 0.60 0.80 0 2 18 15 25 40
190 3 40 4.50 8 2 58 0.60 0.80 0 0 5 8 30 57
240 3 40 4.00 8 2 58 0.60 0.80 0 0 0 2 8 90
Graded Coal  Low Ash High Swell 
30 2 34 5.00 12 7 62 0.80 0.80 0 23 47 12 13 5
75 2 34 4.50 10 7 62 0.80 0.80 0 13 37 15 22 13
100 2 34 4.50 10 7 62 0.80 0.80 0 10 28 12 22 28
145 2 34 4.50 10 6 62 0.80 0.80 0 2 18 15 25 40
190 2 34 4.00 10 6 62 0.80 0.80 0 0 5 8 30 57
240 2 34 4.00 10 5 62 0.80 0.80 0 0 0 2 8 90
Pulverbond    Coal:Clay
80:20 19 31 6.00 - - - - - - - - - - 50
70:30 27 29 7.00 - - - - - - - - - - 60
60:40 35 27 7.50 - - - - - - - - - - 65
50:50 43 23 8.00 - - - - - - - - - - 70
40:60 51 21 8.50 - - - - - - - - - - 75
30:70 59 19 9.00 - - - - - - - - - - 80
Pulverbond LC
65:30:5 27 30 7.00 - - - - - - - - - - 60
45:50:5 43 25 7.50 - - - - - - - - - - 70
25:70:5 60 20 9.00 - - - - - - - - - - 80
Supercast LC
90:10 5 40 6.00 12 - - - - 0 15 45 20 30 35
Pitch Products
Petrocarb 0.80 65 0.20 12+ - - - - 0 2 18 15 35 30
Anthracite
240 D 9 10 2.00 - - - - - 0 0 1.5 5 17 80
 
  TECHNICAL DATA SHEET
 
Technical Data - Coal Dust [0.22 MB]
  HEALTH SAFETY
 
MSDS-Coal Dust (Sea Coal) [0.58 MB]
 
 
 
Better quality of Casting