PINE PACIFIC CORPORATION LIMITED

 
Click here to signup!
Forgot your password?
maintenance
 
PINE PACIFIC | LOGIN
   
 
   
 
 
 
  FERROUS   Sand   Sand Slag No.4  
 
Sand Slag No.4
  DESCRIPTION

The sand slag come from Pumice stone, emery, natural corundum, natural garnet and other natural abrasives, whether or not heat - treated. It’s application for slag off from the molten metal to clean it from the oxide that related to the slag inclusion and gas problem in the casting.
We put it on top of molten metal to react with the contaminate (Oxide) then take out from the furnace or ladle. The sand slag no.4 is suitable for FC and FCD casting


ORIGIN: Japan or new Zealand


ADVANTAGE OR BENEFITS:
• Have very good reaction with the contaminates in the molten metal.
• Very good efficiency on trapping the oxide and other impurity in molten metal.
• Less consumption per 1 time of slag off completely.
• Suitable size for each casting grade (Gray cast iron or steel casting)

 

   
  STANDARD SPECIFICATION
Spec. SiO2 AL2O3 Fe2O3 CAO MgO K2O NA2O Ti O2 lgloss SIZE
85%MIN
Standard 71.5-74.8 % 12.7-14.5 % 1-1.35 % 0.78-1.7 % 0.09-0.2 % 3.7-4.75 % 2.5-3.45 % 0.06-0.13 % 2.5-3.45 % 0.3-0.6 MM
 
  TECHNICAL DATA SHEET
 
Technical Data - Sand Slag No.4 [0.06 MB]
  HEALTH SAFETY
 
MSDS-Sand Slag No.4 [0.25 MB]